Downlight installation method

Downlight installation method

The installation of recessed led downlight should not only be based on the spacing of the recessed led downlight, but also the specifications of the recessed led downlight. The indoor space environment has a certain impact on the effect of the recessed led downlight.

Downlight Specifications

There are many specifications of recessed led downlight. The most used in the family is 6-8 cm in diameter and 12-15 cm in height. Therefore, when making a ceiling, the reserved space should not be less than 15 cm, otherwise the downlight cannot be installed. , then you have to install spotlights... The power of the recessed led downlight is not large, because the bulbs used in the recessed led downlight are energy-saving bulbs, generally between 8 watts and 25 watts, and the power of the bulbs can be based on the size of the space. Come to decide, the light source will be insufficient when you buy a small one and install it.

Downlight Spacing

There is no standard installation spacing for recessed led downlight. It is necessary to arrange the spacing flexibly according to the indoor conditions and the total length. As long as it is determined that they are on the same side, several recessed led downlight need to be installed, and they can be evenly distributed according to the length. Appropriate space should be reserved for the specifications. If the consideration is not considered and the reserved space is not made, the downlight may not be installed. However, a generally suitable spacing distance is between 1 meter and 2 meters, or it can be farther. Calculated according to a room of 9 square meters, the suitable downlight spacing is suitable for 1.3 meters, you can refer to.

Downlight installation method

Step 1: According to the size and installation position of the downlight, make a line and drill holes on the ceiling.

Step 2: Connect the reserved power cord in the ceiling to the downlight.

Step 3: Adjust the wing nut that fixes the reed of the downlight so that the height of the reed is the same as the thickness of the ceiling.

Step 4: Push the downlight into the opening of the ceiling and install a bulb of the right size.