Instructions for Replacing the Reflector
Aug 05, 2022
GA-SPCOB a range of garden spotlights for outdoor lighting environments. It is made of sturdy high-quality aluminum, which is beautiful and sturdy, not easy to deform and not easy to rust. LED light source with Bridgelux chip, have low energy consumption combined with a high luminous flux. It can work at a minimum temperature of -20°C and a maximum temperature of 45°C.Includes bracket and spike, can be fixed to the wall or the ground. The head can be rotated 360 degrees for flexible installation. Protection class IP67, widely used in villas, hotels, parks, squares and other landscape lighting. Beam Angles Common angles for spot or flood effects are 24 degrees and 40 degrees.
Item No. | GA-SPCOB 20W GA-SPCOB 15W GA-SPCOB 10W GA-SPCOB 5W |
LED type | For CREE/Brigelux/Osram |
Luminous flux | 80lm/W |
CCT | 2700K, 3000K, 4000K, 6000K, R/G/Y/B |
CRI | 80+ |
Beam angle | 24°, 40° |
Warranty | 3Years |
Certifications | CE, RoHS |
Input voltage | 90-265V AC or DC12, DC24V |
Insulation class | Class I, Class III |
Cable | 1 PC rubber cable 1M H05RN-F 3x1.0mm square |
Driver | For Eaglerise |
IP rating | IP67 Waterproof |
Trim | Aluminum 6063 |
Glass | Tempered Glass. T=8mm. |
Cable Gland | PG7 IP67 |
Gasket | O-ring PMQ silicone seal |
Mounting Spike | Aluminum |
If the customer wants to replace the reflector, how to do it?
Let's take a 15W as an example to illustrate:
Notice:
1.There are 2 types of reflectors: 24°and 40°, and their heights are different.
2. The heights of the two sides of the ring are different, to match the reflectors:
3.If you want to change the 40° reflector to 24°:
Firstly, you need to open the cover, remove glass、ring and 40° reflector;
Secondly, put the 24° reflector into the lamp body, and set the ring with side B upward. Then put the glass and screw on the cover;
Finally, check that the reflector does not shake in the lamp body, finish installation.
If you have any questions, feel free to contact us at any time!!!
