LED wall washer series installation instruction
May 06, 2022
Precautions before installation:
1. Please read the installation manual carefully before use.
2. Non-professional technicians, please do not repair or modify this product without authorization.
3. Please turn off the power before installation to avoid electric shock due to improper operation.
4. Before installation, please pay attention to check whether the voltage marked on the wall washer is consistent with the input voltage to be connected, so as not to damage the LED wall washer.
5. To ensure the service life of the LED wall washer, please do not use it in a place with strong acid mist.
6. Pay attention to shock resistance during installation and transportation.
7. Before installation, make sure that the installation position can bear 10 times the weight of the product, and install it in a flat place with no vibration, no swing, and no fire hazard;
8. If the lamp fails, please place the lamps in one place, and then send them back to our company for inspection and maintenance;
9. If the wire of the lamp body is found to be damaged, please turn off the power immediately and stop using it.
Installation instructions:
1. First fix the lamp with screws;
2. Connect the lamp to the power cord, and wrap the unused cord with waterproof tape;
3. When installing and wiring, each power connector can connect to 8-10 PCS or over 50 meters connect another one.
4. After the installation is completed, check the installation circuit to confirm that the installation is correct and there is no electrical short circuit, and then turn on the corresponding control power supply;
5. If there is any problem during installation, please consult our technical staff;
DMX512 external control LED wall washer installation diagram:
Note: This diagram takes the working voltage of the wall washer as AC220V as an example. If the voltage of the wall washer is AC24V, the input voltage must be AC24V.
Single color/internal control LED wall washer installation diagram:
Note: This diagram takes the working voltage of the wall washer as AC220V as an example. If the voltage of the wall washer is AC24V, the input voltage must be AC24V.
