How to repair/replace LED underwater lights

If many swimming pools are equipped with LED underwater lights, on the one hand, it can play a role in lighting, so that the night swimming pool is no longer dark, on the other hand, it can also decorate and decorate the pool to become a unique landscape.

However, like lamps in other locations, underwater lamps may also burn out or malfunction. How do we replace or repair them? Do you want to let out the water in the swimming pool? Let's teach you how to replace the underwater light!

1. First find the distribution box that connects all the underwater lights, cut off all the power supplies, press the switch of the lights, and check whether the power has been cut off.

2. Unscrew the top screw on the lamp. This screw may be a flat-blade screw or a Phillips screw, so it is best to prepare two screwdrivers.

3. Remove the lamp from the embedded part/pendant. Generally speaking, when installing the LED underwater light, a wire of 1-1.5 meters will be reserved. Therefore, we do not need to drain the water, and directly pull the underwater light to By the pool.

4. Overhaul/replace the LED underwater light directly on the shore. After powering on to test whether it can work normally, cut off the power supply and install the light back to its original position.

5. After turning on the power here and checking whether the light is normal, the repair/replacement can be completed.