Call Us: +86 18029380520Email: tinna@greenartled.com

The composition of led inground lights

Oct 13, 2022

3W Adjustable beam angle inground uplight

The body of the LED underground light is made of die-casting or stainless steel 304 or 316, and the cover is made of stainless steel 304 or 316. Other components include silicone sealing ring, high-strength tempered glass, waterproof connector, silicone rubber sealing ring, PCB, LED or lens, and waterproof glue. The 36W LED Underground Light screw is made of stainless steel, and the protection level of the lamp should reach IP67; when installing the LED underground lamp, plastic embedded parts can be selected to facilitate the installation and maintenance of the lamp.


Linear In-Ground light have a variety of colors, which can achieve red, yellow, green, white, colorful jumping, gradient and other effects. LED underground light has the characteristics of high brightness, low energy consumption, soft light, no glare, etc., and the efficiency can reach 85%.


The input voltage of the high-power underground light is AC230V or DC 24V. The light source can choose standard low-power (diameter 5 or SMD2835\SMD5730\SMD5630) light source and high-power 1W light source, COB light source, this kind of light is widely used in green belts, parks, lawn lighting, courtyards, pedestrian streets, parking lots, squares and other places.


The glass of the In-Ground Uplighter must be tempered, its strength should be able to withstand the impact force of 2-4N/cm, and the thickness is 5-10mm. The hardness of the rubber ring is 35H, which is a U-shaped rubber ring, because such a rubber ring can be directly sleeved on the glass. The waterproof lens must keep a certain distance from the tempered glass so as not to affect the light quality.


LED outdoor lights for ground have several sizes, 3 voltages, and 3 sizes. There are 12 sizes: 65mmxH80MM, 80mmxH80MM, 100mmxH90MM, 120mmxH90MM, 130mmxH90MM, 150mmxH90MM, 160mmxH90MM, 180mmxH95MM, 200mmxH95MM, 220mmxH95MM, 250mmxH95MM, 300mmxH95MM,3 input voltage: DC12V, DC24V, AC100-240V. The 3 shades are beveled edge, glass lens and curved glass lens. The buried lamp shell is a die-cast aluminum shell with a thickness of more than 3mm, and the direct or indirect contact area between the lamp shell and the LED exceeds 80%. When pouring glue around the waterproof lens, the glue should be poured to 1/2 of the waterproof lens. The underground lamp power supply is waterproof power supply, and the protection level is above IP67.


You May Also Like